Cloth Face Mask With Colloidal Silver Filters

The best face mask filters include nanosilver filters and HEPA filters — they increase the efficacy of face masks in filtering out particulates. If you’re shopping for a face mask with a filter or for standalone filters, medical experts share tips on what to know and set expectations on … what filters can — and cannot do for you and your loved ones

A cloth face mask is a mask made of common textiles, usually cotton, worn over the mouth and nose. When more effective masks are not available, and when physical distancing is impossible, cloth face masks are recommended by public health agencies for disease “source control” in epidemic situations to protect others from virus laden droplets in infected mask wearers’ breath, coughs, and sneezes. Because they are less effective than N95 masks, surgical masks, or physical distancing in protecting the wearer against viruses, they are not considered to be personal protective equipment by public health agencies. They are used by the general public in household and community settings as perceived protection against both infectious diseases and particulate air pollution.

Cloth face masks were routinely used by healthcare workers starting from the late 19th century until the mid 20th century. In the 1960s they fell out of use in the developed world in favor of modern surgical masks, but their use has persisted in developing countries. During the COVID-19 pandemic, their use in developed countries was revived as a last resort due to shortages of surgical masks and respirators.

Prior to the COVID-19 pandemic, reusable cloth face masks were predominantly used by healthcare workers in developing countries and were especially prominent in Asia. Cloth face masks contrast with surgical masks and respirators such as N95 masks, which are made of nonwoven fabric formed through a melt blowing process, and are regulated for their effectiveness. Like surgical masks, and unlike respirators, cloth face masks do not provide a seal around the face.

In healthcare settings, they are used on sick patients as source control to reduce disease transmission through respiratory droplets, and by healthcare workers when surgical masks and respirators are unavailable. Cloth face masks are only recommended for use by healthcare workers as a last resort if supplies of surgical masks and respirators are exhausted. They are also used by the general public in household and community settings as perceived protection against both infectious diseases and particulate air pollution and to contain the wearer’s exhaled virus laden droplets.

Several types of cloth face masks are available commercially, especially in Asia. Homemade masks can also be improvised using bandanas, T-shirts, handkerchiefs, scarves, or towels.

The World Health Organization (WHO) recommends that cloth face masks should be worn in public where social distancing is not possible to help stop the spread of coronavirus. It notes that wearing a cloth face mask is just one of a range of tools that can be used to reduce the risk of transmission. The US Center for Disease Control, along with Johns Hopkins University School of Medicine, The Mayo Clinic, and Cleveland Clinic all concur with this recommendation. The World Health Organization also recommended that those aged over 60 years old or with underlying health risks require more protection and should wear medical masks in areas where there is community transmission.

The World Health Organization recommends using masks with at least three layers of different materials. Two spunbond polypropylene layers are also believed to offer adequate filtration and breathability. When producing cloth face masks, two parameters should be considered: filtration efficiency of the material and breathability.
The filter quality factor known as “Q” is commonly used as an integrated filter quality indicator. It is a function of filtration efficiency and breathability, with higher values indicating better performance. Experts recommend Q-factor of three or higher.

Cloth face masks can be used for source control to reduce disease transmission arising from the wearer’s respiratory droplets, but are not considered personal protective equipment for the wearer as they typically have very low filter efficiency. There are no standards or regulation for self-made cloth face masks.

As of 2015, there had been no randomized clinical trials or guidance on the use of reusable cloth face masks. Most research had been performed in the early 20th century, before disposable surgical masks became prevalent. One 2010 study found that 40-90% of particles in the 20-1000 nm range penetrated a cloth mask and other fabric materials. The performance of cloth face masks varies greatly with the shape, fit, and type of fabric, as well as the fabric fineness and number of layers. As of 2006, no cloth face masks had been cleared by the U.S. Food and Drug Administration for use as surgical masks. A Vietnamese study of healthcare workers compared influenza-like illness outcome among those wearing cloth masks versus medical masks. They concluded that cloth masks were ineffective at preventing transmission in high-risk clinical settings. Although discouraged in clinical settings, cloth masks can still serve a vital role in reducing disease transmission in public settings according to a systematic review.

The primary role of masks worn by the general public is to “stop those who are already infected broadcasting the virus into the air around them.” This is of particular importance with the COVID-19 pandemic, as silent transmission seems to be a key feature of its rapid spread. For example, of the people on board the Diamond Princess cruise ship, 634 people were found to be infected—52% had no symptoms at the time of testing, including 18% who never developed symptoms. It is important to note that mask wearers are more likely to engage in other hygiene measures such as hand washing and social distancing. Best practice is to implement multiple prevention techniques to reduce risk, as characterized by the Swiss cheese model.

An experiment carried out in 2013 by Public Health England, that country’s health-protection agency, found that a commercially made surgical mask filtered 90% of virus particles from the air coughed out by participants, a vacuum cleaner bag filtered out 86%, a tea towel blocked 72% and a cotton t-shirt 51%—though fitting any DIY mask properly and ensuring a good seal around the mouth and nose is crucial. The use of common fabrics in making face masks has been tested. Filter efficiency can be improved with multiple layers, high weave density, and a mix of different types of fabrics. Cotton is the most commonly used material, and filter efficiencies can reach >80% for particles <300 nm with fabric combinations such as cotton-silk, cotton-chiffon, or cotton-flannel. The most protective cloth masks need at least three layers with a hydrophilic inner layer (i.e. cotton) to absorb moisture from the wearer’s breathing and hydrophobic outer layers (i.e. polyester). Masks should be cleaned after each use. They can either be laundered or hand-washed in soapy hot water and dried with high heat.

In Roman times, Pliny the Elder recommended that miners use animal bladders to protect against inhaling lead oxides. In the 16th century, Leonardo da Vinci advised the use of a wet woven cloth to protect against toxic agents[which?] of chemical warfare. In the early modern period, the plague-doctor costume included a beaked face-mask worn to protect the wearer from infectious “miasma”.

Conventional cowboy attire in the American West often included a bandanna, which could protect the face from blown dust and also potentially doubled as a means of obscuring identity.

In 1890 William Stewart Halsted pioneered the use of rubber gloves and surgical face masks, although some European surgeons such as Paul Berger and Jan Mikulicz-Radecki had worn cotton gloves and masks earlier. These masks became commonplace after World War I and the Spanish flu epidemic of 1918.

Cloth masks were largely supplanted by modern surgical masks made of nonwoven fabric in the 1960s, although their use continued in developing countries. They were used in Asia during the 2002-2004 SARS outbreak, and in West Africa during the 2013-2016 Ebola epidemic.

During the COVID-19 pandemic, multiple[quantify] countries recommended the use of cloth masks to reduce the spread of the virus.

On June 5, 2020, WHO changed its advice on face masks, recommending that the general public should wear fabric masks where widespread COVID-19 transmission exists and physical distancing is not possible (for example, “on public transport, in shops or in other confined or crowded environments”). Public mask-wearing has proven most effective in countries where there is high compliance and cultural acceptance.[need quotation to verify]

The post Face Cloth Mask With Colloidal Silver Filters appeared first on Ezi Silver.